Before installing, it is good for you to read this post, so that there will be no trouble for you in getting started and there will be no risk of losing even a single bit of your data: READ NOW
Olarila is the real vanilla hackintosh, for more information on Olarila you can head over to their website olarila.com.
So first of all lets keep in mind a few things:
- Which BIOS should I have? UEFI bios, Legacy might not work.
- What is the size of your ESP? You need to have an ESP of at least 200MB size.
- Specs of your processor. Your processor needs to support SSE 4.1.
- Which partiton style are you using? You need to have GPT.
After that you can start the process, but make sure you check these four important steps mentioned above before getting so far:
- INCREASE EFI SYSTEM PARTITION SIZE OTHERWISE YOU WILL NOT BE ABLE TO BOOT BACK INTO WINDOWS
- CHECK WHETHER YOU HAVE GPT OR MBR PARTITIONS
- CHECK WHETHER YOUR PROCESSOR SUPPORTS SSE 4.1/ 4.2
Increasing the size of EFI partition is really important. by default, windows has an ESP (EFI SYSTEM PARTITION) of 100MBs, whereas disk utility requires you to have at least 200MBs of ESP. So if you will not increase the size, then Disk Utility will raise an error MEDIAKIT REPORTS NOT ENOUGH STORAGE FOR CURRENT OPERATION, and it will damage your ESP and you will not be able to boot back into windows until you repair the ESP.
So, after doing these processes, its time for downloading!
After downloading the files create a bootable flashdrive and boot into the it to open clover and start the installation.
PLEASE WATCH THE FULL TUTORIAL BELOW TO AVOID ANY ISSUE: Full tutorial is available on my Patreon. CLICK HERE TO ACCESS MY PATREON
To access the Hackintosh Fixes and also Kext Installation tutorials, Access this Patreon Tier
.png)
